items 49 - 60 of 91 total

Sold Out CAN AM X3 Maverick M130 Adaptor Kit PNP CAN AM X3 Maverick M130 Adaptor Kit PNP

CAN AM X3 Maverick M130 Adaptor Kit PNP

MoTeC's CAN AM X3 MAVERICK M130 PNP kit is a fully programmable direct replacement for the factory-fitted ECU. No rewiring is necessary; the kit pl...

Sold Out CAN Keypad: 15 Button CAN Keypad: 15 Button

CAN Keypad: 15 Button

CAN Keypad: 15 Button3 rows of 5 buttons(includes 1 set of labels)

Sold Out CAN Keypad: 8 Button CAN Keypad: 8 Button

CAN Keypad: 8 Button

CAN Keypad: 8 Button2 rows of 4 buttons(includes 1 set of labels)

Sold Out Connector BR2 5 Pin Connector BR2 5 Pin

Connector BR2 5 Pin

Connector BR2 5 Pin

Sold Out Connector E7 ECU 26 Pin Key 3 Connector E7 ECU 26 Pin Key 3

Connector E7 ECU 26 Pin Key 3

Connector E7 ECU 26 PinKey 3

Sold Out Connector E7 ECU 34 Pin Key 2 Connector E7 ECU 34 Pin Key 2

Connector E7 ECU 34 Pin Key 2

Connector E7 ECU 34 PinKey 2

Sold Out Crimp Tool for M800 Non-Ratchet Crimp Tool for M800 Non-Ratchet

Crimp Tool for M800 Non-Ratchet

Crimp Tool for M800 Non-Ratchet

Sold Out DBW4 DBW4

DBW4

The Drive by Wire expander (DBW4) provides four configurable motor drives that can be used to control drive by wire throttles. The connected ECU s...

Sold Out DTM Connector Crimp Tool DTM Connector Crimp Tool

DTM Connector Crimp Tool

DTM Connector Crimp Tool

Sold Out Dual Half Bridge Dual Half Bridge

Dual Half Bridge

Actuators are devices, usually connected to an auxiliary output on the ECU, that can perform functions such as idle speed and boost control. They a...

Sold Out E888 E888

E888

The E888 Expander module is designed to increase the I/O (input/output) capacity of MoTeC products. With CAN connectivity and a number of configur...

Sold Out GPS-L10 GPS-L10

GPS-L10

The GPS-L10 is a 10 Hz GPS which combines the electronics and antenna into one small unit. A highly sensitive receiver allows the GPS to lock onto ...