LTCD NTK

MoTeC’s LTCD NTK (Lambda to CAN) modules monitor, control and diagnose NTK Lambda sensors, transmitting readings on a CAN bus. When multiple LTCD NTKs are used, up to 32 Lambda sensors can be configured on...

Options

  • Description
  • Customer Review
  • Product tags

MoTeC’s LTCD NTK (Lambda to CAN) modules monitor, control and diagnose NTK Lambda sensors, transmitting readings on a CAN bus. When multiple LTCD NTKs are used, up to 32 Lambda sensors can be configured on a single CAN bus, allowing an ECU or logging device to simultaneously monitor numerous Lambda sensors.

NOTE: MoTeC’s LTCD NTK is also available in a singular version, LTC NTK

Sensors Compatibility

  1. NTK, 5 wire sensor

Basic Specifications

Inputs/Outputs

  1. 2 x NTK Lambda sensors (MoTeC #57007)
  2. Power supply voltage 11 V – 16 V
  3. Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to 2 A on startup)

Communications

  1. 1 x CAN at 1 Mbit/sec

Connectors

  1. 1 x 4 pin male DTM connector (power/CAN)
  2. 2 x mating connectors for NTK Lambda sensors

Physical

  1. Dimensions 38 x 26 x 23.5 mm excluding wiring looms and connectors
  2. Weight 100 grams
  3. Maximum ambient temperature 100 °C

Download Datasheet

  1. CDS61305 LTCD NTK Lambda to CAN Dual

Product tags

Related Products

Sold Out Wideband Lambda sensor Bosch LSU 4.9 Wideband Lambda sensor Bosch LSU 4.9

Wideband Lambda sensor Bosch LSU 4.9

The Bosch LSU 4.9 sensor is a 5 wire wideband Lambda sensor. It is used to control fuel and ignition systems to optimize a car's performance in the...

Sold Out PLM: Kit with NTK Lambda Sensor 6m PLM: Kit with NTK Lambda Sensor 6m

PLM: Kit with NTK Lambda Sensor 6m

The PLM is available as part of a complete Lambda measuring kit consisting of the module and all essential accessories: PLM Lambda sensor loo...

Sold Out DBW4 DBW4

DBW4

The Drive by Wire expander (DBW4) provides four configurable motor drives that can be used to control drive by wire throttles. The connected ECU s...

Sold Out PLM- METER ONLY PLM- METER ONLY

PLM- METER ONLY

The quick and easy to use Professional Lambda Meter (PLM) measures the air fuel ratio over a wide range of mixtures with fast response time. It has...

Sold Out LTC NTK LTC NTK

LTC NTK

MoTeC’s LTC NTK (Lambda to CAN) modules monitor, control and diagnose NTK Lambda sensors, transmitting readings on a CAN bus. When multiple LTC NTK...

Sold Out LTCD 4.9 for Bosch 4.9 LSU LTCD 4.9 for Bosch 4.9 LSU

LTCD 4.9 for Bosch 4.9 LSU

MoTeC’s LTCD (Lambda to CAN Dual) modules monitor, control and diagnose Bosch LSU 4.9 Lambda sensors, transmitting readings on a CAN bus. When mult...

Sold Out LTC 4.9 for Bosch LSU 4.9 LTC 4.9 for Bosch LSU 4.9

LTC 4.9 for Bosch LSU 4.9

MoTeC’s LTC (Lambda to CAN) modules monitor, control and diagnose Bosch LSU 4.9 Lambda sensors, transmitting readings on a CAN bus. When multiple L...