Communication Cables

Most MoTeC devices need to be connected to a PC or laptop to configure the device or to download data from the device. To find the required connection hardware, look up the device that needs...

Regular price

Options

  • Description
  • Customer Review
  • Product tags

Most MoTeC devices need to be connected to a PC or laptop to configure the device or to download data from the device.

To find the required connection hardware, look up the device that needs to be connected in the following table and the corresponding MoTeC Device Port.

The preferred connection method will determine the PC port to connect to and the hardware required to do so. If this preferred PC port is not available, there may be an alternative connection method.

  1. red tick - preferred connection method
  2. table star - alternative connection method
  3. s - connection using alternative device port (slow)

Serial Logic Level

MoTeC provides solutions to connect the device to the PC's serial port or USB port. The simplest connection method is via the PC's serial port, however many modern computers do not have a serial port, in this case use the USB connection method.

Communication hardware and device wiring to connect MoTeC products with a Serial Logic Level port to the PC.

In order to update the software in the ECU or to enter an upgrade password a Software Update Unit (SUU) is required.

Applicable MoTeC Products

  1. M4 with serial number less than 3000
  2. M48
  3. M8

Product tags

Related Products

Sold Out Dual Half Bridge Dual Half Bridge

Dual Half Bridge

Actuators are devices, usually connected to an auxiliary output on the ECU, that can perform functions such as idle speed and boost control. They a...

Sold Out Honeywell 250 PSI Pressure sensor Honeywell 250 PSI Pressure sensor

Honeywell 250 PSI Pressure sensor

MoTeC supplies a wide variety of quality pressure sensors, all of which have been tested and calibrated to suit MoTeC systems. These sensors come i...

Sold Out Lights Lights

Lights

Typically, lights are used as a warning light, shift lights or other types of information lights. Shift lights are used to indicate the optimum tim...

Sold Out Ignition Systems Ignition Systems

Ignition Systems

HOW TO CHOOSE To decide which products to use for your ignition system consider the following factors : Trigger System : The ignition timing is ...

Sold Out Switches Switches

Switches

Rotary Switches 9 position rotary switch Resistive divider type for connection to an analogue input Push Button Switches Push Button Switches Red P...

Sold Out Force & Motion Force & Motion

Force & Motion

G-Force These sensors are used to measure vehicle acceleration, i.e. acceleration, braking and cornering force, which are also used for drawing tra...

Sold Out Position Position

Position

Throttle Position D-Drive white Throttle Position Sensor, LH D-Drive black Throttle Position Sensor, RH D-Drive Throttle Position Sensor Connecto...

Sold Out Pressure Pressure

Pressure

How Pressure Is Measured Pressure sensors work on a differential basis by measuring the difference between the applied pressure and a reference pre...

Sold Out Temperature Temperature

Temperature

Details Air Temp Air Temperature Sensor 14 x 1.5 mm Delco 15 to 100 °C TMAP Sensor Pressure: 20 to 300 kPa Temperature: -20 to 130°C Air Temper...

Sold Out Lambda Sensor Lambda Sensor

Lambda Sensor

Features Wideband 5 wire Lambda sensor Bosch LSU 4.9 Wideband 4 wire Lambda sensor Bosch LSM Wideband 5 wire Lambda sensor Bosch LSU (4.0) Wideba...